Planer operator's procedures as follows: First, earnestly implement the relevant provisions of the "rules of metal cutting machine tools." Seriously implement the following relevant provisions. Second, earnestly implement the following general provisions relating to planer mill: 1, the installation of the workpiece table by force should be a professional gantry milling, avoiding uneven stress leads to deformation of the table. 2, the workpiece chucking is completed, the table must first slow moving gantry milling machining parts address, check the collision and travel, so there was no problem to change before work. 3, table operation and are not allowed to beam down simultaneously. After the beam each fall, should rise again slightly, to eliminate the gap between the screw nut. 4, table travel, generally not less than one third of the whole trip, when the longest stroke rate should be lower, so that the reverse is not more than 100 mm stroke offside appropriate. 5, the absolute prohibition of standing countertop, run the table or do other alignment work. Planer with a goal planer, milling machine and other features. The machine has railhead, side turret, table using a switched reluctance motor drive, to achieve a variable speed Zhengzhou surrounding gantry milling, planing to meet cutting processing of a variety of speed requirements, suitable for roughing and finishing. Planer is engaged in numerous planer machine design, manufacture years of senior experts developed on the basis of the traditional goal planer new machine, which features the most advanced machine tools convergence advantages.